Welcome Back! Please login to get access to restricted area or for shopping.

The cart is empty
  1. Bernd
  2. SkalarkiIO Profiler 5.1 SDK Version
  3. Wednesday, 17 June 2020
  4.  Subscribe via email
Hi Marcin, my trimwheels are not resetting to 0 at touchdown like they do in the real airbus. I have raised the issue to Jeehell already, because i thought that the hardware is acting "passive" and as long the FMGS-software doesn´t command the reset on touchdown the trimwheels aren´t resetted either.

Jean-Luc has told me, that the reset on touchdown is emplemented in the FMGS and as far as he knows it´s an issue in the Skalarki Profiler. May you can you put some light onto it? Or tell me where i can set the profiler correctly. :)
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hello Marcin,
Hello Bernd,

I have the same problem and the same statement from Jean-Luc.
I have already checked the settings in the Profiler, but found nothing about it.
It would be great and helpful if Marcin could get something done here.

Best regards and a nice weekend,
Mario
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Any chance to get an info about this, Marcin.
Even if it´s the case that the profiler can´t provide that function wouldn´t degrade the value of your stuff anyway. It´s just something i want to know if it´s worth for further investigation.
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Both of you have old TQ, where this option was not supported as it was not available in fmgs. Then issue comes from that I believe, as new TQ versions works with no problem.
1. What is the state of Trim wheels after landing? Are they blocked?
2. If you land and then you want to fly again. Is Trim locked or can you trim manually?
Marcin
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
SKALARKI electronics Ltd
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hi Marcin,
to 1.
No, the trim wheels are not blocked, are usually only on a positive value, not on "0"

to 2.
It can be manually trimmed immediately after landing or with a "touch and go".

Best wishes
Mario
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
same here. no blocking and manually trim is no problem. But not reset to 0 at touch down.
I think i have the 2015 TQ but i got it in February this year.
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Marcin, is there maybe a way to update the Firmware of the "old" TQ´s, that they could handle the trimwhell reset?!? If this is a capabiltiy of newer HW
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hi Mario

Which Profiler are you using?
Marcin
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
SKALARKI electronics Ltd
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hi Marcin,

I use the Profiler version 5.1

Best wishes
Mario
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Yes, but which exactly. Go to About window, there is more detailed number. Check as well jeehellfmgs.dll version.
Marcin
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
SKALARKI electronics Ltd
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Sorry Marcin,
here are the exact dates:
Profiler - 5.1.2.1000
JLFMGS.dll - 5.1.2.1000

Best wishes
Mario
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hi Marcin,

Small supplement.
I made an update to the current Profiler version yesterday.
Unfortunately without success, here too the trim does not return to "0".

There were also two problems with the update.

1.
The variables in the profiles for the module have changed.
Before "[color=#ff0000]FSX[/color] JEEHELLAirbus", now "JEEHELLAirbus"
This can be changed quickly via "Search" and "Replace".

2nd
We start the profiler via the "SIMSTARTER" and only when P3D is fully loaded is the "FMGS" from JeeHell started via the instructor station.
So far, that worked without problems.
If the profiler is now started before "FMGS" there is an error message (see attachment), the profile is stopped.
In any case, JeeHell must now be started before the profiler, ie "Hardware Connect: Yes (green) can be seen in the profiler.
Why? Feature or bug?

Thanks and best regards
Mario
Attachments (1)
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hi Mario
Can you remind me what is your TQ versions set in Profiler/Settings, please.
Marcin
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
SKALARKI electronics Ltd
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hello Marcin,

I don't see much in the Profiler, it only says 0 - 0 - 2000 - 0.
However, some time ago we had to reload the FW and got the "TQ_2015_Rev02_86.hex" from you.
Does it help you?

Best wishes
Mario
Attachments (1)
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
In Profielr/Settings/TQ tab
There are radio boxes to pick TQ version.
Marcin
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
SKALARKI electronics Ltd
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hi Marcin,

Snapshot as attachment, I hope that's ok.

Best wishes
Mario
Attachments (1)
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
ok, I am working on new Profiler with some logging. We can try to setup support session on Monday. Then we can try to track the issue.
Marcin
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
SKALARKI electronics Ltd
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
this sounds promising :woohoo:
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hello Marcin,

Great, I'm excited.
Thank you for taking care of this problem!
We only have flight operations until around 2 p.m. on Monday, after which we can test. ;-)

Do you also think of my comments from Threed # 1895, point 2?

Have a nice weekend, stay healthy,
Best regards
Mario
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hello Marcin and Mario, did you get in touch and tested the issue yesterday? :)
Comment
There are no comments made yet.
Accepted Answer Pending Moderation
0
Votes
Undo
Hello Bernd, hi Marcin,

no, I was on standby until late last night.
Marcin hadn't answered.
The Profiler version in the download area has not yet been updated.

I can still be reached for a long time today and am happy to be available for tests. However, we have event flights and flight training until around 7 p.m. today.
So we can test from 7 p.m. until midnight! ;-)

@Bernd, I will let you know as soon as there is something new!

best regards
Mario
Comment
  1. Marcin
  2. 4 months ago
  3. #1
There is new Profiler available. Use About/License status/Check for Updates button. I would need to see on your system what we can log.
There are no comments made yet.
  • Page :
  • 1
  • 2


There are no replies made for this post yet.
Be one of the first to reply to this post!