please, your help is needed.
I am going to connect Skalarki TQ to PSU.
I know that TQ needs three PSU:
24V 2.5A PSU (for TQ stepper motor),
12V 60W PSU (for all control boards),
15V 60W PSU (for back light).
Six wires come out from the green connector. On pluging the connector in its base, as you know, the standard order from the left side to the right side is the following: blu - black - brown - black - black - green.
I cannot understand which is the sequence to connect these wires to the different PSU and specifically which wire shall be connect to each PSU (I know that black is - polarity always).
Many thanks in advance.
My best regards